Touch Screen Calibration: 9000mfp

The LaserJet 9000mfp has its own touch screen calibration procedure. Its successors, the 9040 MFP and 9050 MFP, use the standard procedure.

  1. Hold down 1, 2 and 3 on the keypad while powering on the printer.
  2. Release the keys when crosses appear in the corners of the display.
  3. Gently touch each cross with a thin object. Touching them makes them disappear.
  4. Power off the printer once all four crosses are removed in this way. Then power the printer on again.
  5. Use the diagnostic menu to access the control panel. Select the TOUCH SCREEN option.
  6. Zigzagging squares appear on the display. Counting from the left, press the second square so that it darkens. Then press the seventh and the seventeenth. If they do not darken when touched, repeat the calibration process.
  7. You are finished. Press Start.

 


Touch Screen Calibration: 9000mfp

The LaserJet 9000mfp has its own touch screen calibration procedure. Its successors, the 9040 MFP and 9050 MFP, use the standard procedure.

  1. Hold down 1, 2 and 3 on the keypad while powering on the printer.
  2. Release the keys when crosses appear in the corners of the display.
  3. Gently touch each cross with a thin object. Touching them makes them disappear.
  4. Power off the printer once all four crosses are removed in this way. Then power the printer on again.
  5. Use the diagnostic menu to access the control panel. Select the TOUCH SCREEN option.
  6. Zigzagging squares appear on the display. Counting from the left, press the second square so that it darkens. Then press the seventh and the seventeenth. If they do not darken when touched, repeat the calibration process.
  7. You are finished. Press Start.

 

Touch Screen Calibration: 9000mfp

The LaserJet 9000mfp has its own touch screen calibration procedure. Its successors, the 9040 MFP and 9050 MFP, use the standard procedure.

  1. Hold down 1, 2 and 3 on the keypad while powering on the printer.
  2. Release the keys when crosses appear in the corners of the display.
  3. Gently touch each cross with a thin object. Touching them makes them disappear.
  4. Power off the printer once all four crosses are removed in this way. Then power the printer on again.
  5. Use the diagnostic menu to access the control panel. Select the TOUCH SCREEN option.
  6. Zigzagging squares appear on the display. Counting from the left, press the second square so that it darkens. Then press the seventh and the seventeenth. If they do not darken when touched, repeat the calibration process.
  7. You are finished. Press Start.



HP Printer Parts

LPT is a printer parts vendor. Reach us at (608) 268-7600.

Learn more »

Quality Rebuilt Fusers

Every LPT remanufactured fuser is tested and inspected.

Learn more »

Printer Tech Support

Every LPT Tech Support provider has worked in printer service since the early 1990s.

Learn more »