| Part # | Description |
|---|---|
| CE710-67903 | Belt: Intermediate transfer belt assembly - Included in the service and includes transfer roller |
| RC2-6691 | Cap: T2 contact - For the second-transfer high-voltage PCA cap |
| CE270A | Cartridge: Black print cartridge - Prints approximately 12,000 standard pages |
| CE271A | Cartridge: Cyan print cartridge - Prints approximately 11,000 standard pages |
| CE273A | Cartridge: Magenta print cartridge - Prints approximately 11,000 standard pages |
| CE272A | Cartridge: Yellow print cartridge - Prints approximately 11,000 standard pages |
| RC2-6760 | Cover: Cross-member left cover |
| RC2-6931 | Cover: Duplexing gear cover - Used for duplex models only |
| RC2-6732 | Cover: Front arm cover 1 |
| RC2-6733 | Cover: Front arm cover 2 |
| RC2-6738 | Cover: Front center hinge cover |
| RM1-7133 | Cover: Front cover assembly - Plastic cover that protects the front part of the printer |
| CE707-67902 | Cover: Front cover assembly - Plastic cover that protects the front side of the printer |
| RC2-6713 | Cover: Front left hinge cover |
| RM1-6958 | Cover: Front lower cover assembly - Used for the 3 x 500-sheet paper feeder tray assembly |
| RC2-9320 | Cover: Front right cover - For the paper feeder |
| RC2-6715 | Cover: Front right hinge cover |
| RC2-6627 | Cover: Front right lower handle cover |
| RM1-6949 | Cover: Front upper cover assembly - For the paper feeder |
| RC3-0688 | Cover: Gear cover - Plastic cover that protects the 18/29-tooth gear - For the simplex models only |
| RC2-7204 | Cover: Guide cover - Cover the arm front guide |
| RC2-6670 | Cover: Handle guide cover |
| RC2-6573 | Cover: Imaging HVT cable cover |
| RC2-6737 | Cover: Internal lower front cover |
| RC2-9349 | Cover: Left cover - For the 3 x 500-sheet paper feeder |
| RC2-9331 | Cover: Left cover - For the paper feeder |
| RM1-7143 | Cover: Left cover assembly - Plastic cover that protect the left side of the printer |
| RC2-9350 | Cover: Left lower cover - For the 3 x 500-sheet paper feeder tray |
| RC2-6642 | Cover: Lower connector cover |
| RC2-9332 | Cover: Lower handle lower cover - For the paper feeder |
| RC2-6625 | Cover: Lower left handle cover |
| RC2-9357 | Cover: Lower rear cover - For the 3 x 500-sheet paper feeder |
| RC2-6650 | Cover: Main cross-member cable cover |
| RC2-6574 | Cover: Main drive cable lower cover |
| RC2-6832 | Cover: Protective cable cover |
| RC2-9348 | Cover: Rear cover - For the 3 x 500-sheet paper feeder |
| RC2-9330 | Cover: Rear cover - For the paper feeder |
| RM1-7147 | Cover: Rear cover assembly - Plastic cover that protects the rear side of the printer |
| RC2-6626 | Cover: Rear right lower handle cover |
| RC2-9343 | Cover: Right corner cover - For the 3 x 500-sheet paper feeder |
| RM1-7144 | Cover: Right front cover assembly - Includes control panel |
| RC2-9346 | Cover: Right lower cover - For the 3 x 500-sheet paper feeder |
| RC2-9347 | Cover: Right lower cover - For the 3 x 500-sheet paper feeder |
| RM1-6948 | Cover: Right lower cover assembly - For the paper feeder |
| RC2-8424 | Cover: Right rear cable cover |
| RM1-7142 | Cover: Right rear cover - Rectangular shaped plastic cover that protects the right rear side of the printer |
| RM1-7148 | Cover: Top cover assembly - Plastic cover that protects the top part of the printer - Holds paper after it has been printed |
| RC2-6962 | Cover: Waste toner cover |
| RC2-6963 | Cover: Waste toner cover |
| RM1-6012 | Cover: Waste toner cover assembly |
| RM1-6165 | Delivery: Paper delivery assembly |
| CE707-67909 | Door: Inner door assembly - Door that give access to the cartridge area |
| RM1-6946 | Door: Right door assembly - For the paper feeder |
| RM1-6007 | Door: Right door assembly - For used with duplex models only |
| RM1-6138 | Door: Right door assembly - For used with simplex models only |
| RM1-6953 | Door: Right door assembly - Used for the 3 x 500-sheet paper feeder tray assembly |
| RC2-7034 | Door: Toner collection unit access door |
| RC2-7091 | Door: Upper right door |
| RM1-6005 | Drive Assembly: Duplex reverse drive assembly - Used for duplex models only |
| RM1-6120 | Drive Assembly: Duplex reverse drive assembly - Used for simplex models only |
| CE707-67904 | Drive Assembly: Fusing drive assembly - Includes motor (M4) and the fuser gear assembly |
| CE708-67901 | Drive Assembly: Main drive assembly - Used for duplex models only |
| CE707-67905 | Drive Assembly: Main drive assembly - Used for simplex models only |
| CE709-67902 | Drive: 120GB encrypted hard disk drive - Includes right and Left rail, disk drive cradle, and power/data cable assembly |
| CE707-67901 | Drive: 8GB drive solid state kit - Include driver retainer |
| RC2-8388 | Duct: Fan duct - Diverts air to the power supply fan (FM1) area |
| RC2-7300 | Duct: Front duct - Mounts next to the upper cartridge guide |
| RC2-8360 | Duct: Joint duct - Mounts on the right door area |
| RK2-2276 | Fan: Cooling fan (FM1) - Provides air to the right side of the printer |
| RK2-3301 | Fan: Formatter cooling fan (FM3) - Provides air and cools the formatter area |
| RK2-2728 | Fan: Fuser fan (FM2) - Provides air to the fuser area |
| RM1-6040 | Feed Assembly: Toner feed assembly |
| RC2-7196 | Frame: Front support frame - For the registration sensor assembly |
| RC2-7197 | Frame: Rear support frame - For the registration sensor assembly |
| RM1-6180 | Fusing Assembly: Fusing Assembly - For 110VAC - Bonds toner to paper with heat |
| RM1-6181 | Fusing Assembly: Fusing Assembly - For 220 VAC - Bonds toner to paper with heat |
| RM1-7914 | Gear Assembly: Fusing gear assembly |
| RU6-0775 | Gear: 18/29-tooth gear - For simplex models only |
| RU6-0771 | Gear: 25-tooth gear - For the duplex models only |
| RU6-0772 | Gear: 25-tooth gear - For the duplex models only |
| RU6-0773 | Gear: 74-tooth gear - For the duplex models only |
| RU6-0795 | Gear: Link worm gear |
| RC2-6932 | Hook: Duplexing spring hook - For duplex models only |
| RM1-6122 | Laser/Scanner: Laser scanner assembly |
| RM1-6039 | Lifter: Lifter drive assembly |
| RM1-6043 | Lifter: Multi-porpuse/tray 1 lifter plate assembly |
| RC2-6823 | Link: Intermediate transfer belt (ITB) coupling release link |
| RC2-7236 | Link: Rear right door link |
| RC2-9327 | Link: Right door lower link - For the paper feeder |
| RC2-9335 | Link: Right door upper link - For the paper feeder |
| RM1-6088 | Motor: DC motor assembly - Includes motors (M1, M2, M3) |
| RK2-3298 | Motor: Developing disengagement stepping DC motor (M6) - Engages and disengages the developing unit - Used for the duplex models only |
| RM1-6074 | Motor: Fussing motor (M4) assembly - Drives the fuser pressure and delivery rollers, pressurizes and depressurizes the pressure roller, and engages and disengages the primary transfer roller |
| CE710-69006 | Pad: Tray 1 paper separation pad |
| CE708-67902 | PC Board: DC controller PC board assembly - Used for duplex model only |
| CE707-67906 | PC Board: DC controller PC board assembly - Used for simplex model only |
| RM1-6783 | PC Board: Driver PC board - For simplex models only |
| RM1-6742 | PC Board: Driver PCA - For used with duplex models only |
| RK2-2884 | PC Board: Environment sensor PC board assembly |
| RM1-6989 | PC Board: Feeder PC board - Used for the 3 x 500-sheet paper feeder tray assembly |
| CE707-69001 | PC Board: Formatter PC board assembly |
| RM1-6800 | PC Board: Imaging high-voltage PC board assembly |
| CE707-67907 | PC Board: Interconnect board (ICB) PCA |
| RM1-6987 | PC Board: Paper feeder driver PC board assembly |
| RM1-6759 | PC Board: Power switch PCA assembly |
| RM1-7004 | PC Board: Primary transfer high-voltage PC board |
| RM1-6802 | PC Board: Secondary transfer high-voltage PC board assembly |
| RM1-6779 | PC Board: Toner remaining detection PC board assembly |
| RM1-6944 | Pickup Assembly: Paper pick-up assembly - For trays 3,4, and 5 |
| RM1-6753 | Power Supply: Low voltage power supply assembly - For 110VAC |
| RM1-6754 | Power Supply: Low voltage power supply assembly - For 220VAC |
| CE707-67903 | Roller: Paper pick-up roller assembly - Picks up media from the paper input tray |
| CE710-69007 | Roller: Separation roller assembly - Used for tray 2 |
| RM1-6164 | Sensor: Last paper presence sensor - Advice that there is just on sheet of paper left at the paper tray cassette |
| WG8-5696 | Sensor: Photo-interrupter sensor assembly (Does not include the sensor flag) |
| RM1-7922 | Sensor: Registration sensor assembly |
| RC2- | Shutter: Exhaust shutter - Mounts on the toner feed assembly |
| RC2-7201 | Slide: Push slider - Mounts on the slide guide |
| VT2-5176-004CN | Spacer: DC controller PCA spacer |
| RC2-6646 | Stop: Laser scanner stopper |
| RC2-6811 | Support: Developing coupling support |
| WC4-5251 | Switch: Microswitch (SW2) |
| CE980-67901 | Toner: Toner collection unit kit - Includes waste toner box assembly, and toner cleaning cloth |
| CE979A | Transfer Kit: Intermediate transfer belt (ITB) maintenance kit - Includes Secondary transfer roller assembly, tray 1 pick-up roller, tray 2 pick-up roller assembly and separation roller, tray 3, 4, 5,6 pick-up rollers, and tray 3, 4, 5, 6 feed roller assembly |
| CE860-67901 | Tray Assembly: 1 x 500-sheet paper tray assembly - Used as tray 3 |
| CE725-67901 | Tray Assembly: 3 x 500-sheet paper tray assembly - Used for trays 4, 5, and 6 with stand |
| RM1-6045 | Tray Assembly: Multi-purpose/tray 1 assembly |
| RM1-6942 | Tray: 500-sheet paper cassette tray assembly - Pull out cassette where the paper is loaded into - Can be used as tray 3, 4 , 5 or 6 |
| CE710-67906 | Tray: Tray 2 cassette assembly |
Every LPT Tech Support provider has worked in printer service since the early 1990s.
Learn more »