Lexmark Optra E312
Printer Service Parts. Call LPT for pricing and availability: 608-268-7600.
Printer Models and Numbers
Lexmark Optra E312 (4044-201); Optra E312L (4044-2L1)
| Part Number | Part | |
| 99A0519 | 16MB DRAM Memory SIMM | |
| 99A0521 | 1MB Flash Memory SIMM | |
| 99A0522 | 2MB Flash Memory SIMM | |
| 99A0520 | 32MB DRAM Memory SIMM | |
| 99A0517 | 4MB DRAM Memory SIMM | |
| 99A0523 | 4MB Flash Memory SIMM | |
| 99A0724 | 64MB EDO DRAM SIMM | |
| 99A0518 | 8MB DRAM Memory SIMM | |
| 12G0083 | Bearing assembly, Backup Roll | |
| 12G0069 | Bearing assembly, Transfer Roller Left | |
| 12G0049 | Bearing assembly, Transfer Roller Right | |
| 12G0166 | Bearing, Fuser Exit Roller | |
| 12G0077 | Bearing, Left Hot Roll | |
| 12G0066 | Bearing, Left Pick Roller Shaft | |
| 12G0080 | Bearing, Right Hot Roll | |
| 12G3783 | Board assembly, Controller E312, E312L (Model 2L1) | |
| 12G1878 | Board assembly, Cover Open Sensor E312 | |
| 12G1937 | Board assembly, Engine E312 | |
| 12G1896 | Board assembly, HVPS E312 | |
| 12G1898 | Board assembly, HVPS-110 V ac E312 | |
| 12G1899 | Board assembly, HVPS-220 V ac E312 | |
| 12G0108 | Bracket, Controller Board Mounting | |
| 12G0174 | Bushing, Exit Paper Feed Roller | |
| 12G0030 | Button, Operator Panel | |
| 12G1927 | Cable assembly, Engine to HVPS E312 | |
| 12G0113 | Cable assembly, Fuser Lamp | |
| 12G1940 | Cable assembly, Motor to Engine Board E312 | |
| 12G0027 | Cable assembly, operator panel | |
| 12G1888 | Cable assembly, Power Switch E312 | |
| 12G0099 | Cable assembly, Printhead to HVPS | |
| 12G0065 | Clutch assembly, Pick Roller | |
| 12G0053 | Contact assembly, HV-Main | |
| 12G0052 | Contact assembly, HV-Transfer Roller | |
| 12G0175 | Cover assembly, Cooling Air/Stacker | |
| 12G0098 | Cover assembly, rear | |
| 12G1874 | Cover, Front w/English Overlay E312 | |
| 12G0061 | Cover, Fuser Lamp Wiring | |
| 12G0040 | Cover, Left Side | |
| 12G0037 | Cover, Lower Front | |
| 12G1850 | Cover, Op Panel Cable | |
| 12G0130 | Cover, Pick Roller Access | |
| 12G1847 | Cover, Right Side | |
| 12G0041 | Cover, Top | |
| 12G0176 | Cover, Tray | |
| 56P1435 | External Serial Adapter | |
| 12G0128 | Fan, Cooling | |
| 12G0101 | Fasteners Parts Packet | |
| 12G1891 | Finger, Detack E312 | |
| 12G1885 | Flag, Paper Exit Sensor E312 | |
| 12G0071 | Flag, Paper Sensor Present | |
| 12G0106 | Foot, Rubber | |
| 12G0056 | Frame assembly, Lower E310 | |
| 12G1930 | Frame assembly, Lower E312 | |
| 12G3777 | Frame, Fuser E312 | |
| 12G1882 | Frame, Upper E312 | |
| 12G0090 | Fuse, Power Supply-110 V ac | |
| 12G0075 | Fuse, Thermal | |
| 12G1935 | Fuser Assembly 110 V dc E312 | |
| 12G1936 | Fuser Assembly 220 V dc E312 | |
| 12G0167 | Gear, Fuser Exit Roller | |
| 12G0081 | Gear, Fuser Hot Roll | |
| 12G0161 | Gear, Redrive, Idler #1 | |
| 12G0160 | Gear, Redrive, Idler #2 | |
| 12G0058 | Gear, Transfer Roller | |
| 12G0102 | Gears Parts Packet | |
| 12G0109 | Guide, HV Contact | |
| 12G0126 | Guide, Paper Stacker | |
| 12G1942 | Holder, Fuser Exit Center Roller | |
| 12G0079 | Hot Roll, Fuser | |
| 12G1883 | Housing, Cover Open Sensor E312 | |
| 12G1893 | Lamp, Fuser, 110 V ac E312 | |
| 12G1894 | Lamp, Fuser, 220 V ac E312 | |
| 12G0181 | Latch, Front Exit | |
| 12G1887 | LED assembly, Pre-Transfer E312 | |
| 12G0031 | Lens, Operator Panel | |
| 12G1881 | Lever, Cover Open Sensor E312 | |
| 12G0154 | Lock, Print Cartridge, Left | |
| 12G0155 | Lock, Print CartrIdge, Right | |
| 12G1877 | Main Drive Assembly E312 | |
| 12G0044 | Motor assembly, Main | |
| 12G3972 | Op Panel Overlay, English | |
| 12G0112 | Packet, WT Op Panel Overlay | |
| 12G1931 | Pad assembly, Friction Left E312 | |
| 12G1932 | Pad assembly, Friction Right E312 | |
| 12G0062 | Pad assembly, Pick Roller | |
| 12G0032 | Panel, Operator | |
| 12G0114 | Panel, SIMM Access | |
| 12G0082 | Plate, Hot Roll Ground | |
| 12G0127 | Post, Separator assembly Spring | |
| 1342536 | Power cord; 2.5 m, 8 ft. Right angle, Australia, New Zealand (HV) | |
| 12G1879 | Printhead Assembly E312 | |
| 12G0084 | Roller assembly, Exit Paper Feed | |
| 12G0165 | Roller assembly, Fuser Exit/Redrive | |
| 12G1889 | Roller assembly, Input Paper Feed E312 | |
| 12G1933 | Roller assembly, Pick E312 | |
| 12G0123 | Roller assembly, Redrive | |
| 12G0086 | Roller, backup | |
| 12G0171 | Roller, Fuser Exit | |
| 12G0156 | Roller, Fuser Exit Center | |
| 12G0048 | Roller, Transfer | |
| 12G1884 | Sensor assembly, Input Paper Feed/Size E312 | |
| 12G0073 | Sensor, Paper Present | |
| 12G0064 | Separator assembly, Paper | |
| 12G1934 | Shaft assembly, Input Paper Feed E312 | |
| 12G0172 | Shaft, Fuser Exit Roller | |
| 12G1941 | Shield assembly, Low Voltage Power Supply E312 | |
| 12G1929 | Solenoid, Pick Roller Clutch E312 | |
| 12G0153 | Spring, Cover Open Sensor | |
| 12G0157 | Spring, Detack Finger | |
| 12G0158 | Spring, fuser exit roller | |
| 12G0121 | Spring, Pad assembly, Lower | |
| 12G0068 | Spring, Pad assembly, Rear | |
| 12G0059 | Spring, Print Cartridge Lock | |
| 12G0159 | Spring, Redrive Roller | |
| 12G0104 | Spring, Separator assembly | |
| 12G0025 | Support, Open Cover | |
| 12G1939 | Support, Paper E312 | |
| 12G1892 | Thermistor, Hot Roll E312 | |
| 12G1938 | Tray assembly, Paper E312 | |
| 12G0029 | Tray, Front Exit | |
